Problems associated with automatic gates and their solutions

In Perth automatic gates make your life a lot more comfortable as you don’t have to get down from your vehicle every time while accessing the driveway. All you need to do is push a button or swing a card in a sensory device.

But at times, they can cause troubles to the house owners too. Here the most usual problems produced by automatic gates in Perth and tips to avoid them,

• At certain times, automatic gates in Perth can make loud noises and the reason for this is not so apparent. Sometimes it might be due to the crumbling of the opening mechanism, which is responsible for changing the position of the gate. In that case, you can take down the parts and either reassemble or replace them.
• In order to work, automatic gates in Perth require electricity at all times. If there is any power failure or outage, then you cannot operate the gate. If this is the issue, you have to check whether there is any blown fuse in the house. When you repair it and switch it back into its original position, you can restore the functioning of the gate.
• If there is any obstruction in the gate track, the gate can get stuck and not move properly. Make sure that the tracks are cleared all the time by sweeping the debris at regular interval.
• Keep your gates clean and free of any insects. The presence of any small animals and vermin inside the automatic gates can obstruct the path of the sensors and cause failure. When there is moss or mould, it can also cause similar problems so make sure that the gates are free of any bacterial growth.
• Sometimes the problem lies with the remote control. You must maintain the remote control in good working condition and check if the red light is blinking properly, if not you can either replace the batteries or the remote itself.
• When your gate is not working, check whether it is in manual mode. Sometimes, you cannot switch it back to the automatic mode. This might be due to a problem in the opening mechanism of the gate or the remote control.
• At times, low temperature can also cause issues in automatic gates. When the weather is very cold, you might observe some delay in the opening of the gate or it doesn’t open at all. This is because the metal contracts at lower temperature and if you are not using grease specialised for using in winter, it thickens and cause the gate not to work well.

If these issues are not addressed immediately, they can repair your precious gates beyond repair.