Simple Solutions for Low-Pressure Problem in Your Sprinkler System

An effective sprinkler system is the key to keeping your landscape and yard areas vibrant and lush throughout the spring and summer seasons. Regardless of the expense of the initial install of the system, without proper maintenance, you’ll find water distribution may get “patchy” or uneven. So, to keep it functioning optimally, purchase sprinklers from the leading provider of irrigation supplies in Perth and maintain properly.

The most common problem we come across with routine maintenance in sprinkler systems is ‘low pressure’. Luckily, with early detection this problem can be fixed. If you are experiencing the same problem, read this blog thoroughly and learn how to fix it.

1. Check the Backflow Preventer Valves

The backflow preventer is a safety feature used in the irrigation systems. It comes with two pipes that are connected perpendicularly, and the valves that open and close each of the pipes. This prevents contaminants from entering the water supply. But, in case, if one of these valves is not fully open or is clogged, the pressure in your system may be reduced. If your sprinkler system has been facing the low-pressure problem, check your backflow preventer valves and fix it. If the problem is too severe, install a new sprinkler system from an experienced provider of Perth irrigation supplies.

2. Check the System for Dirt, Grass, or Debris

If there is no problem with backflow preventer, then check your lawn; which means, sometimes the problem with the pressure in your system is as simple as overgrown grass or weeds, dirt, and debris. Because, there is a chance of debris and dirt getting into the underground line and clogs the system.

If not so, then there will be a problem in sprinkler system’s line. As lines of the sprinkler system get older or damaged by tree roots, there will be small holes or cracks in the line that ends up with dirt that cause the flow and pressure to lessen. To rectify this problem, you can flush out the lines. But, if there are bigger holes or cracks in the lines where the debris is coming in, then you should replace your sprinkler system by purchasing it from the professional who specialises in offering irrigation supplies in Perth

Conclusion

Don’t get discouraged by low-pressure problems, just contact the experienced professions, who offer the best irrigation supplies in Perth and find the best sprinkler system to install in your lawn. By purchasing the quality branded sprinkler system from the right place, you not only get the long-lasting sprinkler system that runs efficiently but also you can avoid other problems.