Installing Electric Fence for Your Irrigation Property? Avoid these 6 Mistakes

Building an electric fence could bring several benefits for any property. There are different factors that need to be considered when building an electric fence, especially the amperage and voltage. This is why safety of your animals and everyone else must be a priority when purchasing farm fencing supplies. Here are 6 common mistakes you have to be aware of before installing an electric fence for your property:

Mistake 1: Improper Earth Grounding

Several people are under the impression that skipping on earth grounding is fine. However, one must know how to install several ground rods that are galvanised and attached with good quality ground clamps. Lack of grounding would lead to weak shocks, which is definitely not safe.

Mistake 2: Lack of Animal Training

Each and every animal that you have must be trained, so that they would understand that touching the fence would hurt them. Building a training fence would be ideal for this. Try and force the animal to cross the fence, and this way you could be sure that your animals would never attempt to escape from your property in the future.

Mistake 3: Inferior Quality Insulators

Remember that continuous sunlight exposure would deteriorate the quality of plastic. Therefore, purchase good quality, highly durable insulators from a leading farm fencing supplies provider for safety. Black ones are designed in a way to keep it secure from damage caused by ultraviolet light. You would notice that poor quality insulators would change their colours to white when exposed to sunlight for years.

Mistake 4: Using Different Metals at the Same Time

Never do this. If you try to connect steel wire with copper, the process of electrolysis would happen, leading to corrosion of the metal. This would weaken the intensity of shock as a result.

Mistake 5: Placing the Fence Posts Too Close to Each Other

Make sure that there’s sufficient spacing between two fence posts, preferably over 15 meters. If something crashes into the wire, you would want the wire to bend and pop back up just like a rubber band. Keeping the farm fencing posts too close would break the wires if an animal runs into it, breaking the insulators and posts. You don’t want that to happen.

Mistake 6: Bottom Wire in Close Contact with Wet Vegetation

Wet vegetation would easily absorb as much energy as possible from the fence charger. Therefore, separate the lower wires from other wires, and connect a switch to the lower wires so that you could turn it off if the grass is too tall.

Besides avoiding the mistakes mentioned above, remember that the wires should be at least 12 cm apart, and use a voltmeter to make periodical measurements. A professional irrigation supplies company will have sufficient knowledge and experience with regards to safety precautions and usage of high-quality equipment. Get in touch with a professional today.