Mistakes to Avoid When Choosing Electric Fencing

Electric fences are exactly useful for keeping your farm animals within a restricted space. Many people fail to receive all the benefits of an electric fence as they make mistakes during the installation process. Mistakes produce extra cost and preventing mistakes can save more money. Here are some of the common mistakes that you should avoid…

Poor Earth Grounding

Poor grounding gives weak shock. You might be aware of the electric shock that you suffer from stepping on a wet floor, which is more severe than stepping with rubber- soled shoes. This certain principle is applied to the electric fences, if the earth wires or rods are not well grounded, the current flowing through the wires will not make a complete circuit into the ground. So, the resultant shocks will be weak. Employ an experienced electric fencing supplies Perth contractor to ground your earth rods appropriately.

Inadequate animal training

Each and every animal must learn that the electric fence hurts. There are several methods to do this, but the best two are,

• flagging the fence for visibility
• baiting the fence so they tests it with their nose or tongue

Baiting is more effective and it needs to be done only if when the animals do not respect the fence.

Using Different Types of Metals:

When you hook up steel wire to copper, electrolysis occurs and the metal becomes corroded, which makes the poor contact and weakens the shocking power. So while choosing for an electric fence, look for all the available options or else get help from a contractor.

Inadequate Electric Fence Energiser

A Wimpy fence charger provides a wimpy fence. The fence itself cannot keep the animal in; rather it is an electronic bite in the fence that does the work. So, please buy the one that puts out lots of power.

Fence posts are placed close

Placing the fence posts 3m apart is not applicable. It needs at least 15 meters apart. Posts must follow the terrain and keep the wire at a uniform distance off the ground without too much sag. The good fence should act like a rubber band. When something runs into the wire, you shouldn’t want to break all the insulators or knock the posts out of the ground. If the posts are spread apart, the wire will just bend to the ground and pop-up back. This may vary and please contact us if not sure.

Wires tied tight to each fencepost

To maintain elasticity or rubber band effect, the wires must left float on each line of the fencepost. To restrict wind flap, tape is locked into insulators on every post; which causes a lack of elasticity on the wire. Be sure to buy good-quality, long- lasting insulators because the sunlight deteriorates the plastic.

The above are some of the shortlisted common mistakes that you should avoid with electric fencing. So, don’t be afraid to try electric smooth wire fencing. Find good rural fencing supplies in Perth and have a warranty and replaceable components. Take some farm tours and attend some grazing conferences to get more information.