Pump Controllers – An Invaluable Asset for Irrigation Systems

An efficient pumping system is one of the most vital components in irrigation. Besides getting the best irrigation pump, choosing the right controller is important as well. Just in case you didn’t know, a pump controller is one of the most useful irrigation supplies in Perth that can automatically control the operation of a pump by monitoring the pressure and flow of water. Here’s more you need to know about it.

An Overview of Pump Controllers:

Even though a controller is said to automate a pump’s function, the underlying purpose of it is to reduce or prevent damage to the pump.

Every motor pump is designed to operate within specifications, and if something unusual happens, it can cause extensive damage to the pump. Pump controllers can detect such changes, and shut down the pump automatically for safety.

3 Ways Pump Controllers Protect a Pump:

Pumps used in irrigation are a significant investment for the future, and they must be protected in every way possible. This is why pump controllers are one of the widely used irrigation supplies in Perth. Here are three different ways with which a pump controller can prevent damage and extend the life of water pumps:

• If the water source is disrupted due to a broken intake valve, blocked filter or even lack of water in the tank, the pump will be automatically turned off by the controller. If this accessory isn’t installed, the pump will continue to run long enough to cause failure. You’d end up buying new parts or even replacing the pump.
• Pump controllers constantly monitor the pressure in the pumping system. If an excess pressure is detected at any time, it will automatically turn off the pump instantly. When the pressure falls back within the safe range, the pump will be turned back on accordingly.
• The frequent on-off switching may have an impact on the lifespan of the pumping system. When you see this happening with the help of a pump controller, you can decide on purchasing cycle stop valves and special pressure tanks to stabilise the pressure.

Important Features of a Pump Controller:

Some of the best pump controllers are sold at stores offering quality irrigation supplies near me. A typical controller will have the following features:

• Automatically start and stop the pump, every time the tap is opened or closed. This way, the operator doesn’t have to manually turn off the pump after usage.
• Consistent pressure will be maintained during the operation
• The plug and play model is easy to set up, so you don’t have to hire a licenced electrician to install or replace the controller.
• The system pressure will be displayed in real time, hence you won’t need a separate inline pressure gauge.
• If there is a power failure, the operation will be restarted automatically by the controller.

A pump controller can efficiently automate the process of a pumping system, thereby simplifying the tasks for you. Get yours from an irrigation supplies online store today.