Rural Fencing & Irrigation Supplies :: Blog

Month: July 2017

  • Top 3 Mistakes To Avoid While Using Your Irrigation System

    Top 3 Mistakes To Avoid While Using Your Irrigation System

    In Perth, irrigation supplies are costly. Not all homeowners can afford to pay for any damages. Unfortunately, irrigation system is often mistreated or ignored. This is because of the lack of awareness among the customers. When the irrigation system is mismanaged, you would end up spending more money to have them treated or to buy replacements. And naturally your lawn would suffer because of this. Here are some irrigation mistakes to avoid,

    Winter

    There won’t be much use for the irrigation system during the coldest period of the year. So when you are turning it off for the time being, having an occasional inspection is mandatory. Especially when you start it up again during the spring, make sure that there is no damage to the irrigation supplies. In Perth, winter is not much severe. But it is best to check for any problems before you begin to use your components after a long break. Your irrigation system could also be damaged because of pests or accidents over this time frame. So pay attention to any signs of disruption.

    If the sprinkler system was pressurised, even tiny flaws would pose major threats when you run the system

    Negligence

    Automatic irrigation system makes your life easier and more convenient. But sometimes, it can cause a lot of problems. Most people would be tempted to set up a watering schedule in your irrigation system and forget about it. Though this habit would not damage the components, it is not good for your lawn. Grass needs to be soaked in water once in every 2-3 days and even more so when the days are the hottest.

    Also, it is very important to consider the effects of rainfall before setting a permanent schedule. If there is a heavy downpour, your lawn would already be overwatered. And if the irrigation system water them again based the same schedule you have devised for summer, it would stress the grass even further.

    To avoid this, do not fail to consider the actual needs of the lawn at regular intervals and schedule the timing appropriately. One of the leading irrigation supplies in Perth is the rain sensor that can automatically turn off the sprinkler system when the rainfall is heavy enough.

    Lawn mower

    While you are using your lawn mower, make sure that the sprinkler head is laying low so that you can avoid any possible damage. This precaution is necessary because sometimes due to various reasons the sprinkler system could malfunction in the middle job and fail to get down to its original height after its use.

    By avoiding these mistakes, you can prevent any costly repairs in the future.

  • How to Prepare For An Electric Fence Installation?

    How to Prepare For An Electric Fence Installation?

    Electric fencing is a popular option as it provides a psychological barrier and the animals would learn to respect them soon. But electric fencing requires a lot of planning that includes scheming the layout and deciding on what electric fencing supplies in Perth you would need. Without a right plan, you could end spending more than you had intended. Here are the things you need to do before the installation of electric fencing in Perth,

    Learn about the Fencing laws

    Try to get to the bottom of the local and state fencing laws so that you would be aware of your legal responsibilities, liabilities and rights. Consult with a local regulatory body to receive more accurate fencing information. To avoid any future conflicts, contact your neighbouring landowners and discuss about your plan. This is very important if you are fencing around your perimeter/boundary.

    Investigate regarding tax credits

    Electric fencing in Perth is a major investment. Check if you are entitled to tax deductions for the money you had spent on your fencing assets.

    Draw up an installation guide

    There is no fixed plan for electric fencing. The steps would vary based on the type of the fencing you have chosen to suit your requirements. Sketching out the area you are about to fence, including the locations of everything nearby such as buildings, water lines, end posts, feed bunks, trees, fence chargers, electric outlets etc. can be very beneficial.

    Have Topographical maps

    One of the most useful tools that help you to set up field boundaries is the Aerial photography of the area on which you will be installing the fence. They can also provide information based on the contours and slope of your farm.

    Google Earth is helpful in its own way. Though they would not display the lines of your property, you can get to know more about the features of your land.

    Find the perimeter length

    You need to measure the required length of the fencing accurately so that you can purchase electric fencing supplies in Perth with more confidence. If your ordered length is not adequate enough, then you would have to face installation delays. At the same time, over-ordering would lead to wastage. So take the measurements carefully.

    Components

    Now that you have found the perimeter length, it is time to choose your fencing supplier. Once you have made the selection, place the order based on your needs. The height and width of the fence varies depending on the animals you want to contain.

    Other than the fencing components, make sure that you have the other standard tools like scissors, screw driver, protective gloves, shovel etc.

    If you have any doubts regarding the installation, you can turn to your fencing supplier for guidance.