Rural Fencing & Irrigation Supplies :: Blog

Month: January 2020

  • How To Maintain Your Farm Fencing In Good Condition

    How To Maintain Your Farm Fencing In Good Condition

    A good fence is an investment. Designing your fence correctly before you start & using the right materials will help to maximise the value of your investment over the life of the fence. Intact, functional fencing is critical to keeping your animals safe and your neighbours happy. Electric fences are especially vulnerable, as worn or broken wires can endanger your animals or render your farm fencing almost useless. Here we have mentioned a few tips to maintain your farm fencing in good condition.

    Get Tension Right

    Wire fencing is manufactured with a crimp along the line wires to help in the tensioning process. You should tension your farm fencing so that the crimp is about 50% of its original size to make sure the fence is tight, while retaining the overall elasticity of the wire. This will improve the performance of your fence in case of animal impact.

    Dig Deep

    Take the time to make sure your main straining posts are firm as failing to do so will mean you won’t have enough tension along your fence line. Typically they should be dug or driven 1.2m into the ground.

    Straining Posts

    When installing the straining posts for your fence, ensure the struts are long and positioned low. This will create better resistance to hold the post firm and reduce the chances of it falling down in the future.

    Avoid Over-Specified Fencing

    To save money on your fencing installation, avoid using an over-specified fence. For example, when you want to fence animals out instead of containing them, a fence with a larger mesh may be sufficient.

    Tying-Off

    To make tying-off around your straining posts easier, strip out the last few vertical wires of the fence. This will give you far more room to work.

    Guide Your Posts

    Run a single strand of plain wire between your straining posts. This will provide you with a straight line to guide the position of your intermediate posts and will also highlight any undulations in the ground. It’s a cost effective way to raise the fence’s overall height, too.

    Downward Pressure From Cattle

    To protect your fence from downward pressure from cattle, add two strands of high-tensile barbed wire or one electrified plain wire above the fence.

    Securing The Posts

    Don’t drive staples tight against the wire when it comes to securing your fence to the posts. This damages the galvanising on the wire and can reduce the fence’s life.

    High-Tensile Fencing

    Always choose high-tensile fencing. Capable of being strained much tighter than mild steel, it’s easier to erect and is less likely to sag after animal impact. What’s more, it requires fewer posts, so it’s more cost effective.

    If you are looking for irrigation supplies or farm fencing supplies, you can rely on Rural Fencing & Irrigation Supplies.

  • Tips To Choose The Right Irrigation Contractors

    Tips To Choose The Right Irrigation Contractors

    Installing an irrigation system properly offers many benefits, including more efficient and convenient watering, and an increase in your property value. The success of your irrigation system depends largely on the contractor you choose to install it and the accessories you buy from irrigation supplies in Perth. A contractor’s expertise and specialized skills are crucial in determining your system’s efficiency and long-term reliability. Here we have mentioned a few tips to choose the right irrigation contractor.

    Watch Out:

    • Not using special watertight connectors and a protective valve box to safeguard the electrical elements guard against short circuits and prevent corrosion.
    • Mixing sprinklers with different application rates on the same line, which causes one area to be overwatered in order to sufficiently water another.
    • Installing sprinklers too far apart can make it impossible for certain areas to receive enough water and cause brown spots during the hot summer months.
    • Not including a backflow preventer, where required by local codes to protect your drinking water supply.

    Questions To Ask

    The best contractors will encourage you to ask a lot of questions. By asking questions, you will know exactly what you will be getting for your money and what to expect from your new irrigation system. Here are a few important questions to get you started.

    • Is there a warranty on the system? His work should be guaranteed; a one-year warranty is typical. Also, be sure to ask him for names and telephone numbers of recent satisfied customers, so you can call and check his references!
    • Is after-sale service provided? A professional contractor should be willing and able to provide after-sale service.
    • What type of product will be used and why? He should tell you what type of controller, valves and rotors or spray heads are best for your landscape.

    What To Expect?

    An efficient, well-organized contractor will be happy to provide you with all the information you need to make an informed choice. First, the contractor will want to view your property in order to determine soil conditions, water sources and pressure, planting materials, etc. Then, they will present a formal estimate detailing what he plans to do and the total price for materials and installation. Along with the estimate, the contractor should clearly explain all the specifics to you. They should also get the irrigation supplies in Perth from the reliable ones. Some irrigation supplies may also offers rural fencing supplies to the customers. There generally should be little disruption to existing foliage, and the average job should take less than a week.

    If you are looking for a company that offers accessories for rural fencing, you can rely on Rural Fencing & Irrigation Supplies.